Seals
Flexibele pipeflashing with I-Form® base for ceramic rooftiles.
Pipe flashing for housing with ceramic rooftiles, with a roofgradients between 25 and 60 degrees. One piece fully EPDM.
i-Form® - the alternative on lead flashing.
i-Form® is extremely flexible, can easy be formed and will keep formed shape.
- Very flexibel.
- Light in weight.
- Quick to install.
- With- or without self adhesive butyl lines.
- Can be installed in lengths of 10M.
- Screw installation through i-Form® is possible.
- Not theft sensitive, likte other traditional materials.
- Available in 3 colour:
- Black
- Grey
- Red
- Click here for download documents.
- Click here for the I-Form® product page.
i-Form®, is produced by IPEX in the Netherlands.

I-Stick® is a selfadhesive and flexible EPDM foil. Suitable for many construction details in situations were air- and water tightness, UV stability and elasticity must be assured.
I-Stick® has good properties against aging and is recyclable.
Advantages:
- I-Stick® sticks directly on almost any surface.
- Will be cut from rolls of 1000 mm width.
- Light of weight, fast and easy to handle.
- 100% watertight.
- Does not rot.
- Permanent elastic, good properties against aging.
- Ozone and UV resistance.
Applications:
- Arround windows
- Sealing gutters
- Sealing valley gutters
- Arround roof lights
- As selfadhesive EPDM tape for facade panels.
- All kind of joint sealing at roofing situations.
EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.

EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.

EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.

EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.

EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.

I-Form® with EPDM slab.
i-Form® with fixed EPDM for flashing solutions where the combination of i-Form® and just EPDM is required.