Seals
Self adhesive tape, 0.8 mm EPDM with a Acryl based Backing.
The acryl backing creates a strong adhesion.
Suitable for :
- Sealing facade joints.
- Protecting wooden facade battens.
Flexibele pipeflashing with I-Form® base for ceramic rooftiles.
Pipe flashing for housing with ceramic rooftiles, with a roofgradients between 25 and 60 degrees. One piece fully EPDM.
i-Form® - the alternative on lead flashing.
i-Form® is extremely flexible, can easy be formed and will keep formed shape.
- Very flexibel.
- Light in weight.
- Quick to install.
- With- or without self adhesive butyl lines.
- Can be installed in lengths of 10M.
- Screw installation through i-Form® is possible.
- Not theft sensitive, likte other traditional materials.
- Available in 3 colour:
- Black
- Grey
- Red
- Click here for download documents.
- Click here for the I-Form® product page.
i-Form®, is produced by IPEX in the Netherlands.
I-Stick® is a selfadhesive and flexible EPDM foil. Suitable for many construction details in situations were air- and water tightness, UV stability and elasticity must be assured.
I-Stick® has good properties against aging and is recyclable.
Advantages:
- I-Stick® sticks directly on almost any surface.
- Will be cut from rolls of 1000 mm width.
- Light of weight, fast and easy to handle.
- 100% watertight.
- Does not rot.
- Permanent elastic, good properties against aging.
- Ozone and UV resistance.
Applications:
- Arround windows
- Sealing gutters
- Sealing valley gutters
- Arround roof lights
- As selfadhesive EPDM tape for facade panels.
- All kind of joint sealing at roofing situations.
Self adhesive tape, 0.5 mm EPDM with a special Acryl based Backing, for airtight applications.
The acryl backing creates a strong adhesion.
Suitable for :
- Sealing facade joints.
- Airtight sealing.
EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.
EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.
EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.
EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.
EPDM joint profile is also available in a self-adhesive version. EPDM joint tape is used as seal between the facade panel and the rear construction.
Reasons for using EPDM joint profile:
- preventing wood rot;
- smoothing out irregularities in the wooden framework;
- reduction of vibrations;
- protection of the facade panel against acids from the wood;
- weir;
- contact interruption;
- prevention of stripes on the facade panel due to moisture extraction from the facade panel through the wooden framework.
I-Form® with EPDM slab.
i-Form® with fixed EPDM for flashing solutions where the combination of i-Form® and just EPDM is required.
Butyl tape, O Shape
Butyl tape 656 is mainly made of butyl rubber(PIBI),it gives best adhesive performance as well as good performance on sealing and water-proofing.
Uses：
- Steel construction, sun panel, drains parts;
- Window & door; concrete roof; pipes;
- Repairing of roof and cars.
Butyl tape, ( Shape.
660 waterproof butyl tape gives best performance on weather resistance, UV resistance, oxides resistance, and Non-solidified in its lifetime.
Uses：
- Steel construction, sun panel, drains parts.
- Window & door; concrete roof; pipes.
- PC panel, repairing of roof and cars.
Butyl tape, U Shape
660 waterproof butyl tape gives best performance on weather resistance, UV resistance, oxides resistance, and Non-solidified in its lifetime.
Uses：
- Steel construction, sun panel, drains parts.
- Window & door; concrete roof; pipes.
- PC panel, repairing of roof and cars.
Butyl tape, I Shape.
660 waterproof butyl tape gives best performance on weather resistance, UV resistance, oxides resistance, and Non-solidified in its lifetime.
Uses：
- Steel construction, sun panel, drains parts.
- Window & door; concrete roof; pipes.
- PC panel, repairing of roof and cars.
Performance:
aluminum / stainless steel / copper
Sealing:
High-quality 2 mm EPDM with closed cell which provides a watertight seal. Under normal circumstances, a minimum lifespan of 25 years can be expected.
Color:
natural / powder coating
Packaging:
bulk / boxes / bags
Performance:
aluminum / stainless steel / copper
Sealing:
High-quality 2 mm EPDM with closed cell which provides a watertight seal. Under normal circumstances, a minimum lifespan of 25 years can be expected.
Color:
natural / powder coating
Packaging:
bulk / boxes / bags
Sealing washer with high quality bonded EPDM. Protects and seals under the head.
BL = Zinc plated steel / EPDM
BM = RVS A2 / EPDM
BN = Aluminium / EPDM
Sealing washer with high quality bonded EPDM.
BL = Zinc plated steel / EPDM
BM = RVS A2 / EPDM
BN = Aluminium / EPDM
Liseko sealing washer with high quality bonde.
EPDM. BM = RVS A2 / EPDM
BO = Copper / EPDM
EPDM bonded sealing washer with stainless steel presswasher for fixing on corrugated sheets.
Flexible pipe fl ashing with zipper, especially designed for existing constructions.
Flexible pipe flashing with zipper, especially designed for existing constructions.
* For profiles up to 40 mm. deep. For roofgradients over 20º you have to choose the next mentioned size. For the right diameter of square based pipe fl ashings please multiply the width with 1.3.
Flexible pipe flashing.
* For profiles up to 40 mm. deep. For roofgradients over 20º you have to choose the next mentioned size. For the right diameter of square based pipe fl ashings please multiply the width with 1.3.
Stretchable EPDM-roll (grey) with aluminium edges. Suitable for all kinds of connections.
