Coloured ringnail for the assembly of plates on wood. We coat ringnails in any color.

SA = Stainless steel A2
SB = Stainless steel A4

Center tube: to create fixation point into the cladding panel.

Distance tube: to prevent compression of the cladding panel, due to tight fixation

Drillscrew for facade panels -, Fibrecement, Pressed Mineral Panels to timber battens .

Material Stainless 304 / A2

Wing - Drillscrew for mounting facade panels - Fibrecement, Pressed Mineral panels to aluminum or steel subraming.

Material Stainless 304 / A2, Bi-Metal

Part of fixing system B002 - I-Facade.

Drill screw for ventilated facade cladding.

Product to be used in combination with 0521 fix and slide centering sleeves

Special cutting tool for fixing system B002.

This tool cuts the protective film from the cladding panels before fixing. After mounting the façade, the protective film can be removed without it sticking to the fixings.

Siding clamp for several applications

Stainless steel 304

Pan head woodscrew double threaded. With any sealing washer if required.

Pan head woodscrew. With any sealing washer if required.

Pan head wooddrill wingscrew. With any sealing washer if required.

Pan head woodscrew double threaded. With any sealing washer if required. Head diameter 15 mm.

Selfdrilling flatheaded woodscrew, with a special smal head for sidingpanels.

Pan head selfdrilling woodscrew.

Pan head woodscrew. With any sealing washer if required.

Selfdrilling flatheaded screw.

Coloured rivets large head, we can coat these in every color.

BE = Alu / RVS A2

BF = RVS A2 / RVS A2

For a tension free blindrivet fixation. The nosepiece prevents a to tight fixation of the cladding panel. The panel will be able to move easy to thermal influences.

Suitable for a head diameter up to 16 mm.

For centric drilling of fixation holes through cladding material in to the substructure, for blindrivet fixation. In case of expending materials a tension free fixation is created.

For centric drilling of fixation holes through cladding material in to the substructure, for blindrivet fixation. In case of expending materials a tension free fixation is created.

The set is packed in a plastic case and is suitable for:

Blindrivet body diameter 4,0
Blindrivet body diameter 5,0

Base hole 8,5 mm.
Base hole 10,0 mm.
Base hole 12,5 mm.

Note: Follow the installation guidelines of the panel manufacturer.

Control tool for Stepdrill

Pan head drillscrew with a reduced drillpoint. With any desired sealing washer.

Pan head drillscrew with drillpoint no. 2. With any sealing washer if required.

Pan head drillscrew with drillpoint no. 3. With any sealing washer if required.

Pan head drillscrew with drillpoint no. 5. With any sealing washer if required.

Pan head drillscrew with a reduced drillpoint. With any sealing washer if required.

Woodscrew for woodconstructions.

Woodscrew for woodconstructions.

Woodscrew for woodconstructions.

Plastic insulation anchor suitable for solid material. Temp. steadiness: -40° C up to +70° C.

Plastic spreading nail and anchor suitable for hollow material. Temp. steadiness: -40° C up to +70° C.

Plastic insulation anchor, plug and metal pin with plastic cover suitable for fixing in solid material. Temp. steadiness: -40° C up to +70° C.

Plastic plug and metal pin with plastic cover suitable for fixing in solid and hollow material. Temp. steadiness: -40° C up to +70° C.