Self tapping platescrew with a flat head.

Stainless A2 / 304 screw, special for installation of Eter Backer HD against wooden battens, due to the low profile head, stone strip can be glued on the panel

Coloured rivets large head.

BE = Alu / RVS A2
BF = RVS A2 / RVS A2

Pan head rivet with an EPDM sealing washer.

Multigrip rivets

Sealed rivets.

Peel Rivets.

Multigrip blindrivets - flat head.

Multigrip blindrivets with a large head.

For centric drilling of fixation holes through cladding material in to the substructure, for blindrivet fixation. In case of expending materials a tension free fixation is created.

For centric drilling of fixation holes through cladding material in to the substructure, for blindrivet fixation. In case of expending materials a tension free fixation is created.

The set is packed in a plastic case and is suitable for:

Blindrivet body diameter 4,0
Blindrivet body diameter 5,0

Base hole 8,5 mm.
Base hole 10,0 mm.
Base hole 12,5 mm.

Note: Follow the installation guidelines of the panel manufacturer.

Center tube: to create fixation point into the cladding panel.

Distance tube: to prevent compression of the cladding panel, due to tight fixation

Control tool for Stepdrill

Blindrivet tool can be used with nosepiece 0136 for fast blindrivet installion, suitable for a body diameter 2.4 - 5.0 mm.

Blindrivet battery tool in metal case with a battery charger and a 14.4 volt battery, 1.5 AhP and there is an possibility for a battery 14,4 volt, 3.0 AhP.