Nail anchor with nail head.
Nylon plug with a special screw, suitable for:
A = SizeB = Drill sizeC = Clamping thicknessD = Drill depth
Nylon plug with a special screw (countersunk head).
Cartridge for VMZ-A threaded stud for fastening in cracked and non-cracked concrete
Highload anchor for fast through fastening in cracked and non-cracked concrete.
CF = Zinc plated steel
A = ThreadB = Drill diameterC = Drillhole diameter in fi xtureD = Clamping thicknessE = Setting depthF = Quantity
Threaded stud for chemical glas capsule V-P, chemical anchorsytem for non-cracked concrete surfaces.
SB = Stainless steel A4
A = ThreadB = Drill diameterC = Hole diameter in fi xtureD = Setting depthE = Quantity
Highload anchor for through fastening in non-cracked concrete.
A = ThreadB = Drill hole diameterC = Hole diameter in fi xtureD = Clamping thicknessE = Setting depthF = Quantity
Tool for fixing threaded studs.
MKT, Quality dispenser for cartridges
Wedge anchor zinc plated throughbolt for load bearing in non-cracked concrete.
CF = Zinc plated steel SB = Stainless steel A4
Threaded stud for chemical anchoring to be applied on cracked and non-cracked concrete.
A = ThreadB = Drill diameterC = Length totalD = Setting depthE = Quantity
Chemical glas capsule VE-P for anchoring in non-cracked concrete.
A = DiameterB = Rebar diameterC = Quantity
Hammer-in Capsule VE-P to fasten anchor ribbed rebar.
A = SteeldiameterB = Drill diameterC = Setting depthD = Quantity
Perfo Sleeve VM-SH (plastic), for installation in hollow based material.
A = Drillhole B = Length total C = For thread / Sleeve D = Quantity
Cartridges for througbolt on non-cracked concrete.
Internal threaded sleeve VM-IG (Steel Zinc plated).,
A = DrillholeB = Length totalC = For thread / SleeveD = Quantity
Hexagon head concrete screw. With any sealing washer if required.
Screwanchor for cracked and non-cracked concrete.
CF = Zinc plated steelSB = Stainless steel A5
CF = Zinc plated steelSB = Stainless steel A4
Self tapping screw for autocleaved aerated concrete.
Nylon polyamide-6 nail anchor suitable for solid and hollow material. Temp. steadiness: -40° C up to +70° C.
Nylon polyamide-6-anchor suitable for solid material. Temp. steadiness: -40° C up to +70° C.
Universal metal plug, zinc plated steel, suitable for solid and hollow material.
Zinc plated sleeve anchor of feathersteel suitable for solid and hollow material.
Polyethylene mega plug suitable for solid and hollow material. Temp. steadiness: -40° C up to +70° C.